Textured Fantastico Arni Quartzite Wall Panels

Prefabricated Panel Sizes

Standard & Extra-Large Panels

• Standard Full-Size: 8 ft x 4 ft (2.44 m x 1.22 m) – Most common for wall cladding
• Extra-Large: 10 ft x 6 ft (3.05 m x 1.83 m) or 12 ft x 6 ft (3.66 m x 1.83 m) – Aluminum honeycomb reinforced for stability

Custom & Specialty Sizes

• Feature Wall & Accent Wall Slabs: Custom irregular sizes available; consult our sales team for handling and reinforcement advice
• Shower & Tub Surround Cladding: 60x30 in, 72x30 in, and full-height 8 ft x 30 in panels

3/4 Inch Thick Wall Slabs – Available Sizes

• Foot-Based: 1x1, 2x2, 2x3, 2x4, 2x5, 2x8 ft, 3x3, 3x4, 3x5, 3x6, 3x12 ft, 4x2, 4x5, 4x6, 4x8 ft
• Inch-Based: 16x16, 16x24, 18x18, 18x36, 24x24, 24x36, 24x48, 48x48 in
• Metric: 30x30, 30x60, 36x36 cm, 400x400, 450x450, 600x300, 600x600, 600x900, 900x900, 900x600, 1200x900 mm

Textured Surface Finishes

• Matte & Honed Finish – Smooth, non-reflective surface for an antique, understated elegance
• Patterned Textures – Splitface, brushed, tumbled, fluted, sandblasted, or flamed finishes for a tactile, finger-touching experience
• Marble-Look Appearance – Surface treatment mimics genuine solid stone, ideal for engineered marble, faux marble, and cultured marble applications

Custom Edge Options

• Standard Flat Polished Edge – Clean, modern look
• Beveled Edge – Adds depth and dimension
• Ogee Edge – Classic, decorative profile
• Bullnose Edge – Smooth, rounded finish for safety and elegance
• Mitered Edge – Seamless corner transitions
• Laminate Bullnose Edge – Combines with solid wood (oak, cherry, maple), cultured marble, or stainless steel for unique junctions

Installation & Quality Assurance

Key Points to Discuss with Installers

• Color & Pattern Variation – Natural veining and color shifts; no two panels are identical. Set expectations to avoid claims of "defects"
• Texture & Finish Consistency – Hand-finished rustic surface; inspect each panel for even texture before installation
• Thickness & Flatness – Verify panel thickness (typically 2 cm or 3 cm) and flatness; measure and report any warping or deviations
• Moisture Content & Sealing – Quartzite is dense but porous; test moisture levels and recommend a sealer to prevent staining or efflorescence
• Edge & Corner Integrity – Inspect for chips or cracks from shipping; document issues upon receipt to avoid disputes
• Installation Method & Adhesive Compatibility – Use compatible adhesive (e.g., epoxy or thin-set); get method in writing to prevent loosening
• Pattern Matching & Layout – Dry-lay panels to match veins and textures; share layout plan before final installation
• Warranty & Documentation – Obtain signed checklist from installer; keep photos before and after install for a paper trail